Summertime is the perfect time for a backyard pool party, and what’s a party without a pool? If you have an above ground pool, keeping it full of water can be a bit of a hassle. In this blog post, we’ll show you how to drain an above ground pool quickly and easily. So pull out the floats and get ready for some fun in the sun!
Why Drain Your Above Ground Pool?
As the weather gets colder, you may be wondering if you should drain your above ground pool. After all, water expands when it freezes, so doesn’t it make sense to get rid of as much water as possible?
Actually, draining your pool can do more harm than good. Water is heavy, and when you remove it from your pool, the walls and frame can collapse. Plus, once the pool is empty, it’s much easier for debris and leaves to blow in and clog up the works.
If you do decide to drain your pool, be sure to do so slowly and carefully. And be sure to refill it as soon as possible – otherwise you could end up with a costly repair bill!
How To Drain An Above Ground Pool ? (Step-By-Step)
Step 1: Plan Where The Water Will Go
If you have an above ground pool, you may be wondering how to drain it. Here are some tips to help you get started.
First, you need to plan where the water will go. You don’t want it to flood your yard or damage your home. You may need to rent a pump to help move the water.
Once you have a plan, you can start draining the pool. Start by turning off the pump and removing any plugs or covers. Then, use a hose to start draining the water from the bottom of the pool.
As the water level gets lower, you may need to use a sponge or other tool to remove any remaining water. Once the pool is empty, be sure to clean it out before refilling it.
Step 2: Pick Your Method
If you’re wondering how to drain an above ground pool, you’re not alone. Many pool owners find themselves in the same situation at some point or another. Whether it’s because of water damage, repairs, or simply wanting to clean the pool, draining an above ground pool can be a necessary evil.
Fortunately, there are a few different methods you can use to get the job done. In this article, we’ll walk you through a few of the most popular options so you can choose the best one for your needs.
One of the most popular methods for draining an above ground pool is using a submersible pump. This type of pump is designed to be placed directly into the water and can be used to quickly remove large amounts of water.
Another option is to use a garden hose to slowly drain the pool. This method will take longer, but it’s a great option if you don’t have access to a submersible pump.
Finally, you can also rent or purchase a pool cover pump. These pumps are designed specifically for draining pools and can be a great option if you’re looking for a quick and easy way to get the job done.
No matter which method you choose, draining an above ground pool can be a bit of a hassle. But with a little planning and preparation, you can get the job done quickly and easily.
Step 3: Start Draining The Water
If your pool is too full and you need to get water out quickly, a hose siphon can be a lifesaver. This simple tool can be used to drain water from your pool without having to rely on electric pumps or other complicated machinery. Best of all, it’s relatively easy to use once you get the hang of it.
Here’s how to Drain your Pool with a Hose Siphon:
1. Begin by attaching one end of your garden hose to the faucet outside of your home. Make sure that the hose is securely fastened so that water can flow through it without any leaks.
2. Next, take the other end of the hose and insert it into the pool. It’s important that the end of the hose is submerged in water, so you may need to use a weight or some other object to keep it down.
3. Once the hose is in place, open up the faucet and allow water to flow through it. As the water flows, it will create suction which will pull more water out of the pool and into the hose.
4. Continue until the pool has drained to the desired level. Depending on how much water needs to be drained, this process could take some time.
5. When you’re finished, simply remove the hose and close the faucet. Your pool should now be at the correct water level!
Step 4: Remove The Excess Water
If your above ground pool is starting to show its age, or if you simply want to get rid of it, you’ll need to know how to drain an above ground pool. Draining an above ground pool can be a tricky process, but with a little knowledge and the right tools, it can be done relatively easily.
The first step in draining an above ground pool is to start draining the water. This can be done with a submersible pump, or by using a garden hose to siphon the water out of the pool. If you’re using a submersible pump, make sure that the outlet hose is placed into a large container or the ground so that the water can be safely drained away. If you’re using a garden hose, make sure that the end of the hose is placed below the water level in the pool so that the water will siphon out of the pool.
Once the majority of the water has been drained from the pool, you can begin disassembling the pool. Start by taking off any ladders or steps that are attached to the pool. Then, remove the liner from the pool. If you have a metal frame above ground pool, you’ll need to remove the metal frame as well.
After the pool has been completely disassembled, you can then start cleaning it. Use a power washer to clean all of the nooks and crannies of the pool. This will help to remove any dirt or debris that has built up over time.
Once the pool is clean, you can then start to fill it in. You can use a variety of materials to fill in an above ground pool, but sand is often the best option. Fill the pool with sand until it is completely covered. Then, you can add a layer of topsoil on top of the sand to help level it out.
After the pool has been filled in, you can then plant grass seed or lay sod on top of it. This will help to give your yard a nice, finished look. How to drain an above ground pool is not difficult, but it does take some time and effort. With a little patience and the right tools, you’ll be able to get the job done quickly and easily.
Step 5: Dry Out Your Pool
To drain an above ground pool, you’ll need to remove the water from both the pool itself and the filter. Start by disconnecting the hose from the inlet and outlet valves and draining the water from the pool. Once the pool is empty, disconnect the filter and allow it to dry out completely.
How to Drain your Pool with a Pump?
Most people don’t know how to properly drain their pool with a pump, and as a result, they end up damaging their pool or causing serious injury. Here are the proper steps to take when draining your pool with a pump:
1. Turn off the power to your pool pump.
2. Remove the drain plug from the bottom of the pump.
3. Place the discharge hose over the side of the pool so that it is lower than the water level in the pool.
4. Turn on the power to your pool pump and allow it to run until the water level in the pool has decreased significantly.
5. Turn off the power to your pool pump and remove the discharge hose from the side of the pool.
6. Replace the drain plug on the bottom of the pump.
7. Turn on the power to your pool pump and allow it to circulate water throughout the pool.
How to Drain your Pool with a Hose Siphon?
If your pool is starting to look a little cloudy or you just want to give it a good cleaning, draining the water can be a great way to do so. But if you don’t have a pool pump or other draining equipment, don’t worry – you can still easily drain your pool using a hose siphon. Here’s how:
1. Start by finding two hoses that are long enough to reach from your pool to a nearby drainage area, such as a storm drain or gutter. Make sure the hoses are also wide enough to fit over the end of your pool’s drain outlet.
2. Connect one of the hoses to the drain outlet, and then place the other end of this hose into the drainage area.
3. Take the second hose and place one end into the pool, making sure it’s submerged beneath the water.
4. Start sucking on the second hose until water starts flowing through it and into your mouth. This may take a minute or two.
5. Quickly remove the hose from your mouth and place the open end over the drainage area. Water should start flowing out of the pool and into the drainage area.
6. Once the pool is emptied, remove both hoses and close the drain outlet.
1. How often should I drain my pool?
It is generally recommended to drain your pool once every two to three years. However, this will vary depending on the climate you live in and how well you maintain your pool.
2. Is it harmful to drain my pool too often?
Yes, draining your pool too often can be harmful to the liner and other components of your pool. It is important to only drain your pool when necessary.
3. What are the consequences of not draining my pool?
If you do not drain your pool as needed, the water can become stagnant and make it a breeding ground for bacteria and algae. This can lead to health hazards for you and your family. In addition, the water in your pool can become too acidic and damage the liner and other components of your pool.
4. How do I know if my pool needs to be drained?
There are several signs that indicate your pool needs to be drained, including:
– The water is cloudy or has a green tint.
– There is an unusual amount of stains on the walls or floor of the pool.
– There is a strong chlorine smell coming from the pool.
– There is an algae bloom in the pool.
If you notice any of these signs, it is time to drain your pool.
5. How do I safely drain my pool?
There are two ways to safely drain your pool: with a sump pump or by gravity.
If you have a sump pump, you can attach a hose to the outlet and use the pump to remove the water from the pool. If you do not have a sump pump, you can place the hose in the shallow end of the pool and allow the water to drain out by gravity.
6. How long does it take to drain my pool?
It usually takes about an hour to drain an above ground pool. However, this will vary depending on the size of your pool and the method you are using to drain it.
7. Where can I dispose of the water once it is drained from my pool?
You can either recycle it or dispose of it in accordance with your local regulations.
8.What should I do with the water once it is drained from my pool?
You can either recycle it or dispose of it in accordance with your local regulations.
9. How do I know if my pool is ready to be drained?
The water in your pool should be at least 18 inches below the top of the pool. If it is not, you may need to add more water before draining.
10. How do I prepare my pool for draining?
Turn off the power to your pump and remove any plugs or fittings from the return lines. You will also need to remove any ladders or other accessories from the pool.
So, there you have it! Everything you need to know about draining an above ground pool. If you follow these simple steps, your pool will be drained and ready for winter in no time at all. Be sure to take care when removing the drain plug and cleaning up any debris that may have been stirred up during the drainage process. And most importantly, have fun! Swimming in an empty pool is a unique experience that few people get to enjoy. Enjoy your newly drained swimming hole!