how to prime a pool pump

How to prime a pool pump? : The Full Guide

It’s the middle of summer and you want to take a dip in your pool, but when you turn on the pump, nothing happens. You may be wondering what could be wrong. In this blog post, we will show you how to prime a pool pump so that you can get back to swimming!

What Does It Mean to Prime a Pool Pump?

how to prime a pool pump

When you prime a pool pump, you’re essentially just filling the pump with water so that it can start circulating water through the pool. The process is pretty simple: just turn on the hose and let the water flow into the pump until it’s full. Once the pump is full, it should be able to start moving water through the system and keeping your pool clean and circulated.

If you don’t prime your pool pump, it likely won’t be able to circulate water properly (if at all). This can lead to all sorts of problems, including dirty and stagnant pool water. So if you want to keep your pool in tip-top shape, make sure to prime the pump regularly!

When you prime a pool pump, you’re essentially filling the pump with water so that it can start circulating water through the pool. To do this, you’ll need to attach a garden hose to the inlet side of the pump and turn on the water. The water will then flow into the pump and start moving through the system.

You may need to prime your pool pump if there’s air in the system, which can happen if the pump has been turned off for a while. Priming the pump will help get rid of any air pockets and get the water flowing smoothly again.

Does Your Pool Pump Self-prime?

If you have a pool, chances are you have a pump to circulate the water. But what happens if your pump stops working? Does it mean you have to call a professional to come and prime it for you?

The good news is that most pools pumps are self-priming, meaning they can re-start on their own after being turned off. This is because the pump contains a built-in mechanism that allows it to draw in water from the pool and start circulating it again.

However, there are some circumstances where your pump may not be able to self-prime. This could be because there is something blocking the intake valve, or because the water level in the pool is too low. In these cases, you will need to prime the pump manually before it will start working again.

If you’re not sure whether your pool pump is self-priming or not, the best thing to do is check the manufacturer’s manual. This will tell you everything you need to know about your particular model.

How to prime a pool pump ? : 7 Easy Steps To Priming Your Pool Pump

how to prime a pool pump

If you want to keep your pool in tip-top shape, it’s important to know how to properly prime a pool pump. This process can seem daunting, but we’re here to help! Just follow these simple steps and you’ll have your pool primed and ready to go in no time.

Step 1: Disconnect the Power

This is an important safety precaution that should not be ignored!

Disconnect the power to your pool pump before you attempt to prime it. This is an important safety measure, as there is a risk of electrocution if the pump is turned on while you are working on it. Once the power is disconnected, you can begin the process of priming the pump. This involves adding water to the pump so that it has something to draw from when it is turned on. You can add water to the pump manually or by using a hose. Once the pump has enough water, you can turn it back on and it should be able to start circulating water through your pool system.

Step 2: Take the Lid Off the Pump

If your pool pump is prime, it means that there is water inside the pump. To prime a pool pump, you will need to take the lid off the pump and make sure that there is water inside. You can prime a pool pump by adding water to the pump, or by using a garden hose to add water to the pump. If you are using a garden hose, you will need to make sure that the hose is connected to a water source before you turn on the pump. Once the pump is turned on, it should start moving water into the pool. If the pool pump is not prime, it means that there is no water inside the pump. This can be caused by a number of things, including a leak in the pump, or a problem with the pump itself. If you think that the pool pump is not prime, you should contact a pool professional to have the pump checked out.

Step 3: Set the Multiport Valve to ‘Recirculate’

If your pool has a multiport valve, you’ll need to prime the pump before you can start using it. To do this, simply set the valve to the “recirculate” position and turn on the pump. Once the pump is running, you can then set the valve to the desired position and begin using your pool as normal.

If you need to prime a pool pump, the first step is to set the multiport valve to the ‘recirculate’ position. This will allow water to flow through the pump and prime it. Once the pump is primed, you can then set the valve to the desired position and begin circulating water through the pool.

Step 4: Open the Air Valve

This will allow air to enter the pump and prime it.

Step 5: Clean up the Pump’s Basket

It’s important to keep your pool pump clean so that it can function properly. Over time, dirt and debris can build up in the pump’s basket, causing the pump to work less efficiently. Cleaning the basket regularly will help keep your pump working its best.

If you notice that your pool pump isn’t working as well as it used to, it may need to be primed. Priming a pool pump means adding water to the pump so that it can start circulating again. If your pump isn’t primed, it won’t be able to move water through the system and your pool will eventually become stagnant.

Step 6: Fill Up the Pump With Clean Water

One way to do this is to prime the pool pump. This will help to ensure that the water in your pool is clean and free of debris.

To prime a pool pump, you will need to fill up the pump with clean water. You can do this by using a garden hose or by filling a bucket with clean water and pouring it into the pump. Once the pump is full of water, turn on the power and let the pump run for a few minutes. This will help to prime the pump and get it ready to use.

You can use a garden hose or a bucket for this. Once the pump is full, turn on the power and let it run for a few minutes. This will prime the pump and get it ready for use.

Step 7: Switch the Power Back On

To prime a pool pump, you’ll need to start by ensuring that the power is off. Once the power is off, you’ll need to locate the prime valve on the pump. opening the prime valve will allow water to flow into the pump, and this is what will prime the pump. After a few minutes, you can then close the prime valve and switch the power back on. The pool pump should now be primed and ready to use.

And there you have it! By following these simple steps, you’ll have your pool pump primed and ready to go in no time at all.

What if my pump won’t run?

If your pump won’t run, there are a few things you can check:

– Make sure the power is turned on.

– Check the circuit breaker or fuse box to see if the circuit for the pump is tripped or blown.

– If the pump is hardwired, check the wiring to make sure it’s secure and not damaged.

– Check the pressure switch to make sure it’s turned on.

– Check the intake screen to make sure it’s clear of debris.

– If all of these things are in order, then you may need to call a professional for help.

FAQs

What if the pump is still not working after carrying out all the priming steps?

If the pump is still not working after carrying out all the priming steps, it may be necessary to check for other potential issues. These could include a clogged impeller or a problem with the electrical supply. If the problem persists, it may be necessary to call a professional for assistance.

The pool pump loses power after a few hours, why is that?

There are a few reasons why your pool pump might lose power after a few hours. The most common reason is an issue with the electrical supply. If you’re using an extension cord, make sure it’s rated for outdoor use and that it’s not damaged. Another possibility is that the pump isn’t getting enough water flow. Make sure there aren’t any blockages in the pipes leading to the pump. Finally, the pump may be overworked and need to be replaced.

What do you do when everything looks fine, but the pool pump is still not working?

If your pool pump is still not working after checking for common issues, you may need to contact a professional for help. There are many factors that can contribute to a pool pump not working properly, and a trained technician will be able to diagnose the problem and get your pump up and running again. In the meantime, make sure to keep an eye on your pool’s water level and circulation to ensure that everything is still running smoothly.

It takes my pool pump several minutes to prime. Is that normal?

It is not uncommon for a pool pump to take several minutes to prime. This is because the pump must fill with water before it can begin circulating water through the system. If your pool pump is taking an unusually long time to prime, however, there may be an issue with the pump itself or with the plumbing leading to and from the pump. It is best to consult a pool professional to diagnose and solve any problems you may be having with your pool’s circulation system.

How important is it to prime my pool pump?

It is very important to prime your pool pump because if you don’t, the pump will not be able to circulate water through your pool and keep it clean.

How often should I prime my pool pump?

You should prime your pool pump every time you turn it on. This will ensure that the pump is always primed and ready to go.

 What happens if I don’t prime my pool pump?

If you don’t prime your pool pump, the pump will not be able to circulate water through your pool and keep it clean. This can lead to dirty and unhealthy pool water.

 How do I prime my pool pump?

To prime your pool pump, you will need to pour water into the pump’s intake port until the water starts to come out of the discharge port. Once the water is coming out of the discharge port, you can turn on the pump and it will start circulating water through your pool.

What if I can’t get my pool pump to prime?

If you can’t get your pool pump to prime, you may need to check the impeller to see if it is clogged or damaged. You may also need to check the intake port to make sure there is no debris blocking it. If you still can’t get your pool pump to prime, you may need to call a pool professional for help.

how to prime a pool pump

Conclusion

Prime your pump by following these simple steps and you’ll be enjoying a refreshing swim in no time! If you have any questions about priming your pool pump, don’t hesitate to ask us. We’re always happy to help our customers keep their pools running smoothly all season long.