Illuminating the within of an above-ground pool could make nighttime swimming extra fulfilling. However discovering a strategy to evenly gentle the entire area from one supply may be tough. Use our information beneath to create an answer for connecting and powering lengthy runs of LED strip lights. It may be used for any challenge that requires a number of strip lights to be linked collectively and depend on one energy provide.
The next set up includes connecting 4 waterproof RGB LED strip lights, an incredible choice for pool illumination. With a number of color-changing patterns and watertight development, these strip lights create a enjoyable environment for youths and grown ups alike. Customise the brightness, coloration, and dynamic modes with an elective distant to tailor the lighting to any occasion.
Store all LED Strip Lights Now!
Notice: Some cities require above-ground pool lighting to satisfy Nationwide Electrical Code (NEC) Article 680 requirements, which might restrict attainable pool lighting set up places. Earlier than you buy LED pool lights, examine your metropolis’s code necessities. We additionally suggest that you’ve got a licensed electrician set up your lights.
(1) DiodeDrive® Sequence 240W Energy Provide (1) CPS Barrel to Terminal Connector (1) RGB LC4 Controller and Distant (1) LC4 Splitter Cable (2) LC4 Pigtail Energy Connector (feminine) (8) Waterproof Wire Nuts (4) Waterproof RGB LED Strips
Really useful Instruments and Supplies: (Relying on weatherproofing and set up location wants) 3M Double-Sided Foam Pads 12 mm Silicone Finish Caps Dolphin Connectors With Sealant Silicone Sealant 18-Gauge Two-Conductor Energy Wire Wire Strippers 12 mm Mounting Clips Electrical Tape 3M Adhesion Promoter Velocity Nuts/Cotter Pins
Earlier than ordering your LED strip lights, measure the diameter of your pool and multiply by 3.14 to search out its circumference; this quantity signifies the complete size of strip that you’ll want. The 21-foot pool used for these set up directions has a circumference of 65.94 toes and requires 4 runs of 16-foot LED strips.
2) Arrange Energy Provide
Earlier than you’re prepared to put in your LED strip lights, make sure to drain your pool. Start by creating or finding a dry space away out of your pool for the ability provide. The facility provide must be contained in a weatherproof field. Energy provides must be put in between a floor fault circuit interrupter (GFCI) protected circuit and the pool’s junction field. It’s essential to make use of a GFCI protected circuit, because it shuts off if present flows the place it’s not purported to.
Wire the included plug to the ability provide, however don’t hook up with energy till the set up is full.
3) Arrange Controller
Utilizing the CPS Barrel Connector, join the ability provide to the LC4 controller.
4) Join the RGB LED Strips
Join the output LC4 connector of the controller to the LC4 splitter. Then join the LC4 pigtails to the pigtails of the strips. Use the waterproof wire nuts to seal your connection. Join strip 1 and three collectively utilizing the connectors already hooked up to the strips. Repeat for strip 2 and 4.
5) Mount the RGB LED Strips
You’ll apply strip 1 and three clockwise round your pool rim and strip 2 and 4 counterclockwise.
When you have a flat floor, use mounting clips to safe the strips in place as you go.
If you wish to mount the strips below your pool rim, drill small holes within the trusses roughly each 2 toes. Use cable ties to anchor the strip to the truss. You too can use pace nuts or cotter pins for strip anchoring to keep away from drilling holes.
6) Activate Energy
Plug the ability provide’s hooked up wire into an outlet, and revel in your LED pool lighting system! Refill your pool with water, however be sure to go away area between the water line and the lights.
For extra LED pool lighting options, see our whole line of waterproof LED strip lights. Our giant assortment options single-colored, color-changing, and color-chasing choices.
Full your out of doors area with our large choice of panorama lights— from movement sensor safety lighting to ornamental deck and patios illumination.
For technical questions, don’t hesitate to name us toll free at 866-590-3533. Our customer support and technical assist groups can be found from 8:30 a.m. to eight p.m. CDT Monday-Thursday and eight:30 a.m. to 4 p.m. CDT on Friday.